This product is appreciated for its cost-effectiveness and reliability in simplex network setups. Users value its ability to support high-speed data transmission, making it suitable for gigabit Ethernet applications. However, it is limited to simplex connections and may not be ideal for higher-speed networks.
REASONS TO BUY
Cost-effective - suitable for simplex connections
High-speed data transmission - supports gigabit Ethernet applications
Durable construction - resistant to pulls and strains
CONSIDERATIONS
Limited to simplex connections - may not support full-duplex communication
Single-mode fiber may require more precise alignment than multimode
Not intended for 10GbE networks
BOTTOM LINE
A good option for those needing a reliable simplex single-mode fiber cable.
About AI Content: Vantage Point by Provantage utilizes AI-generated content to enhance your experience, provide product recommendations, and deliver helpful information. While we strive for accuracy and quality, AI-generated content may occasionally contain errors or outdated information. Please verify details before making purchasing decisions.
LC/SC Single Mode Fiber Cable OS2/UPC/Simplex/LSZH
At a Glance
SIMPLEX OS2 CABLE: Single Mode Simplex OS2 Fiber Cable is immune to EMI and optimized for 40G/100Gbps networks; Supports bi-directional (BiDi) transmission over a single fiber; Ideal for space-constrained installations requiring minimal fiber count
QUALITY CONSTRUCTION: LC/SC-UPC ends for improved return loss over PC polish; Bend Insensitive fiber core housed in Aramid-reinforced jacket for a loaded bend radius of 10mm
SAFETY AND RELIABILITY: Individually tested for guaranteed performance; Test report included; LSZH jacket emits low toxic fumes if combusted; Safe for enclosed/poorly ventilated spaces; Attenuation value under 0.35dB/km outperforms industry standards
COMPATIBILITY: Simplex Single Mode Fiber Patch Cord supports 40G/100G networks; Backward compatible with OS1; High micro-bend resistance facilitates tight bends in complex installations; Ideal for point-to-point setups or single-fiber NICs and SFPs
SPECS: 2 meter (6.6 foot); OS2 Single Mode; LC/SC (UPC) Simplex; 100Gbps; 9/125µm; 1260-1625nm Laser Optimized; Insertion Loss: ≤0.3dB; Return Loss: ≥55dB; Cable OD: 2mm; Bend Radius: 10mm (0.39in) loaded/unloaded
Overview
OS2 LC to LC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision- manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to LC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
LC/SC Single Mode Fiber Cable OS2/UPC/Simplex/LSZH
Manufacturer Part Number
SPSMLCSC-OS2-2M
Product Type
Network Cable
Cable Characteristic
Patch Cable
Cable Type
Fiber Optic
Connector Type on First End
LC Network - Male
Connector Type on Second End
SC Network - Male
Fiber Optic Mode
Single-mode
Product Color
Yellow
Color Family
Yellow
Fiber Type
Simplex
Environmental Compliance
Waste Electrical and Electronic Equipment Directive (WEEE)
Cable Length
6.56 ft
Environmentally Friendly
Yes
Jacket Material
Low Smoke Zero Halogen
Connector on First End Details
1 x LC Network - Male
Connector on Second End Details
1 x SC Network - Male
Product Material
Polypropylene
Connector Gender on First End
Male
Connector Gender on Second End
Male
Fiber Category
OS2
Data Transfer Rate
100 Gbit/s
Jacket Type
LSZH
Packaged Quantity
1
Limited Warranty
Lifetime
Stock Details
Manufacturer
StarTech.com
Manuf Part#
SPSMLCSC-OS2-2M
Price
$24.46
Availability
In Stock
esc
SPSMLCSC-OS2-2M StarTech.com LC/SC Single Mode Fiber Cable OS2/UPC/Simplex/LSZH
2m (6.6ft) LC to SC (UPC) OS2 Single Mode Simplex Fiber Optic Cable, 9/125µm, Laser Optimized, 40G/100G, Bend Insensitive, Low Insertion Loss - LSZH Fiber Patch Cord (SPSMLCSC-OS2-2M)
OS2 LC to SC Single Mode Simplex Fiber Optic Patch cable facilitates connectivity across 40G/100G networks. It supports Coarse Wavelength Division Multiplexing (CWDM) across an extended wavelength range of 1260-1625nm, improving channel isolation for optimal signal strength over long distances.
Compatibility
Connect to single-fiber networking devices including simplex patch panels, SFP transceivers, and fiber NICs. This 9/125µm OS2 simplex single mode fiber patch cord is backward compatible with OS1 networks, ensuring a reliable connection in legacy fiber environments.
Engineered for Optimal Performance
Precision-manufactured ceramic ferrules ensure accurate fiber alignment for an insertion loss below 0.3dB. Ultra Physical Contact (UPC)-polished LC to SC fiber ends greatly improve return loss characteristics over older PC polishing techniques. The Bend Insensitive fiber core is surrounded by a layer of low refractive index material. This material reduces the amount of light that can escape the fiber cable by reflecting the light back into the fiber. The OS2 fiber patch cord is engineered for low attenuation and performance that exceeds ITU-T G652.D/G657.A1 and IEC60703-2-50 type B1.3/B6.a1 industry standards.
LSZH Cable Jacket
Housed in a Low-Smoke Zero-Halogen (LSZH) flame-retardant jacket, the OS2 fiber cable emits low smoke and toxic fumes when exposed to extreme heat or in the event of a fire. This enables safer cable installations in areas with poor ventilation including some industrial settings, self-contained environments such as trains and aircraft, as well as residential settings where compliance with building codes must be considered.
Each OS2 fiber cable is individually tested for insertion loss performance and includes a test report, for guaranteed compatibility and 100% reliability.
Information is current to the best of our knowledge. However, prices, promotions, specifications, photos, or offers may change before we are able to update our website. If there's an unexpected cost increase, we will ask you whether you want to continue your order at the new price or cancel it. We reserve the right to decline acceptance of any order.
Insider Deals Get special pricing, new product info & exclusive promos.
CLOSE MENU
7.0
Shop with confidence! Provantage is an authorized StarTech.com dealer.
NAVIGATION MENU