Viking Electronics Double Gang Entry Phone with LED Stainless Steel

Viking Electronics E-60-SS Specifications

Double Gang Entry Phone with LED Stainless Steel

At a Glance

Compact size: Front panel is the size of a typical double gang mid-size wall plate Mounting: Flush mounts in a double gang electrical box (2.25" deep x 3.65" wide x 2.84" tall minimum) or surface mounts in a Viking model VE-5x5 (not included, see DOD 424) for mounting to a wall, post or VE-GNP Gooseneck Pedestal (EWP recommended) Available in 4 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze, Satin Black and Satin White PNL-60 faceplates: Replacement faceplates with matching screws available in all four standard finishes Vandal Resistant Features: 18 gauge 304 stainless steel faceplate, 316 stainless steel push button, carbon fiber reinforced plastic speaker screen, scratch resistant powder coating, hex drive mounting screws Weather Resistant Features: Mylar speaker, faceplate gasket, mic and speaker gasket, internally sealed (IP67) push button switch, self draining mic mount and UV stable weather resistant powder coating (excluding E-60-SS 304 Stainless Steel faceplate) E-60-EWP is designed to meet IP66 Ingress Protection Rating (see DOD 859 for more information) Blue LED helps locate push button, indicate ringing and off hook Telephone line powered Microphone and speaker volume controls

Overview

See all products Entry Phones Now Mount in a Standard Double Gang Box The E-60 Series entry phones are compact, vandal resistant, telephone line powered speaker phones designed to provide twoway handsfree communication. The E-60's compact size allows it to be mounted in a standard double gang electrical box. The E-60 is available in five different attractive finishes to match your door hardware, light fixtures, etc. Replacement E-60 faceplates (PNL60) can be purchased separately and are available in all five standard finishes. The E-60's blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring. The E-60 entry phones can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250 or C-2000B Entry Phone controller. The E-60 entry phones can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-60 features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed. The E-60-SS entry phone is a compact, vandal resistant, telephone line powered speaker phones designed to provide two-way handsfree communication. The E-60-SS's compact size allows it to be mounted in a standard double gang electrical box. Replacement E-60-SS faceplates (PNL60-SS) can be purchased separately. The E-60-SS's blue LED continually provides light for locating the push button in dark locations, dims to indicate off hook and flashes during incoming ring. The E-60-SS entry phone can share a single phone line with house or small business telephones when used with a Viking model C-200, C-250, C-500 or C-2000B Entry Phone controller. The E-60-SS entry phone can also be connected to an unused analog station port (programmed for ring down) on a phone system or connected directly to a telephone line when used with a Viking model K-1900-5 or K-1900-30 auto dialer. The E-60-SS features microphone and speaker volume controls, selectable auto answer for monitoring and intelligent call progress detection for automatic hang-up when the call is completed.

Compatibility

Viking Prodcuts: C-200 Door Entry Controller C-250 Door Entry Controller C-2000B Door Entry Controller K-1900-5 Hot Dialer K-1900-30 Touch Tone Dialer SLP-1 Single Line Paging Controller SLP-4 Single Line Paging Controller

Application/Usage

Telephone Door Entry Commercial Intercom Residential Intercom

Miscellaneous

Use on any analog PABX station port with programmable ringdown capability Programmable intelligent call progress detection for automatic hang-up on CPC, silence, busy signal, or time out Selectable auto answer feature for monitoring