The VP-6124-P is a fully regulated 24 VDC 6 amp switching power supply. The primary is protected by a 4 amp slo-blo fuse and the two amp outputs by auto-resetting fuses. The outputs are floating with respect to ground. The regulator will maintain 24 volts +/-2% over the rated range of input voltages and output loads. A greater than 6 amp load on power up will cause the power supply to current limit. Short circuit protection is provided. Over voltage is provided to limit the output voltage to approximately 28 volts should a failure occur within the power supply. Outputs may be paralleled but not series connected