Tripp Lite Isolation Trans 250W 120V Hospital Grade 2-Outlets UL2601-1

Tripp Lite IS250HG Specifications

Isolation Trans 250W 120V Hospital Grade 2-Outlets UL2601-1

Highlights

Rear View Tripp Lite Medical Grade Isolation Transformers offer full line isolation, continuous noise filtering and enhanced common mode surge suppression, making them ideal for protection of sensitive equipment in patient-care areas. Their Faraday shield provides full line isolation and removes common mode noise while maintaining full AC surge suppression in all modes.

General Information

Features Include <100A leakage current for Isolation Transformer and all connected equipment Circuit breaker overload protection and lighted power switch Hospital-grade plug and outlets All-metal housing

Summary

Tripp Lite Isolator series UL2601-1 listed Hospital Grade isolation transformers offer line isolation, continuous noise filtering and enhanced common mode surge suppression. Internal low-impedance isolation transformer component offers 100% isolation from the input AC line. Full UL2601-1 medical grade listing with hospital-grade plug and outlet receptacles makes Isolator Hospital Grade transformers ideal for the protection of sensitive electronic equipment in patient-care areas. Isolation transformer with Faraday shield reduces the cumulative leakage current of the Isolator and connected equipment to levels below 300 microamps. Secondary neutral to ground bonding virtually eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment and an inexpensive alternative to the installation of dedicated circuits and site electrical upgrades. Removes EMI/RFI noise, utility switching transients, and harmonics generated by other on-site loads and utility or lightning related surge conditions. Additional surge suppression components placed at the line input and output combined with full line isolation offers continuous filtering of a full range of power line noise in all modes. Active transformer filtering offers continuous common-mode noise rejection with no wearable parts, uniquely able to reduce surges in the worst of power environments to harmless levels. Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode. Model IS250HG includes 2 widely spaced NEMA5-15R hospital grade output receptacles, a 6-ft power cord, hospital grade input plug, circuit breaker overload protection and lighted power switch. Rugged all-metal unit housing ships ready for placement in any industrial, medical, office or network environment.

Details

In the box IS250HG Isolation Transformer Instruction manual with warranty information

At a Glance

Complete line isolation, noise filtering and surge suppression; ideal for sensitive equipment 250 watts, 2 outlets, 6-ft. power cord Hospital-grade plug and receptacles Leakage current less than 100 microamps Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Overview

Isolator Series UL60601-1 Listed Medical Grade Isolation Transformers offer line isolation, continuous noise filtering and enhanced common mode surge suppression. An internal low-impedance isolation transformer component offers 100% isolation from the input AC line. Full UL60601-1 medical-grade listing with hospital-grade plug and outlet receptacles makes Isolator medical-grade transformers ideal for protection of sensitive electronic equipment in patient-care areas. Faraday shield reduces the cumulative leakage current of the Isolator and connected equipment to levels less than 100 microamps. Secondary neutral-to-ground bonding virtually eliminates common mode noise, providing an isolated neutral-ground reference for sensitive equipment, and an inexpensive alternative to dedicated circuits and site electrical upgrades. Removes EMI/RFI noise, utility switching transients and harmonics generated by other on-site loads and utility or lightning related surge conditions. Additional surge suppression components placed at the line input and output combined with full line isolation offer continuous filtering of a full range of power line noise in all modes. Active transformer filtering provides continuous common-mode noise rejection with no wearable parts. Unique ability to reduce surges in the worst of power environments to harmless levels. Reduces 6000V IEE More from the Manufacturer

Certifications & Standards

cUL UL 2601-1 UL (UL Series AGIS250YWN)

Miscellaneous

Top View Transformer Type: Medical grade, low impedance transformer-based line isolation transformer Removes EMI/RFI noise, utility switching transients, load-generated harmonics and ground loops Reduces 6000V IEEE587 Cat A&B ring wave and combination wave test surges to only 0.5V common mode Suppression Joule Rating: 680 (510 input/170 output) Leakage Current: As low as 100 microamps Noise Suppression Rating: 35 to 65 DB Total Harmonic Distortion: Less than 1% Over Current Protection: 2A circuit breaker Cooling Method: Convection Efficiency: 96% Let-through Voltage (Ring Wave): L-N: 20 V L-G: 20 V N-G: 0.5 V Let-through Voltage (Combination Wave): L-N: 250 V L-G: 250 V N-G: 0.5 V

Additional Product Images

See all products