Tripp Lite DVI over CAT5 Dual Display Extender Splitter Active Passive

Tripp Lite B140-002-DD Specifications

DVI over CAT5 Dual Display Extender Splitter Active Passive

Summary

Rear View Tripp Lite's B140-002-DD takes in two PC DVI source video signals, and splits each to two remote monitors. Passive, non-powered Receivers allow distances up to 50ft @ 1920x1080 resolution, or 100ft @ 1024x768 resolution, over solid conductor Cat6 cable. Active, powered Receivers extend the distance to 150ft @ 1920x1080, and 200ft @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained (up to 3) on each channel, allowing four monitors per channel, by using Tripp Lite B140-110 Repeater/Extender. Tripp Lite recommends Cat6 Solid Conductor patch cables for Digital Extenders (DVI/HDMI). Tripp Lite N202 series patch cables are designed specifically for these types of devices...pre- terminated, Solid Conductor Cat6 patch cables up to 200ft.

Details

Right View Features Include Transmits a DVI-D Single-Link signal from a set of Dual DVI inputs to two sets of Dual Displays A B140-Series remote receiver is needed at each monitor For longer distances: Use a B140-1A0 or B140-1A0-WP active receiver to extend a 1920 x 1080 @ 60Hz signal up to 150 ft. from the transmitter (or a 1024 x 768 @ 60Hz signal up to 200 ft. from the transmitter) For shorter distances: Use a B140-1P0 or B140-1P0-WP passive receiver to extend a 1920 x 1080 @ 60Hz signal up to 50 ft. from the transmitter (or a 1024 x 768 @ 60Hz signal up to 100 ft. from the transmitter) Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lites N202-Series to achieve maximum distance and resolution Further expand the range and number of monitors by adding B140-110 remote repeater units Add up to three repeaters on each of the B140-002-DD channels, for a total of 4 displays per channel (An active receiver should be the last unit in a channel) A 1920 x 1080 @ 60Hz signal can be extended up to 125 ft. for each repeater added into a channel (or up to 175 ft. for a 1024 x 768 @ 60Hz signal) DVI 1.0 compliant HDCP compatible Mounting hardware included that allows the unit to be wall-mounted, rackmounted, or pole mounted Plug and play; no software or drivers required Compatible with all operating systems Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases In the box B140-002-DD Extender / Splitter Transmitter Unit External Power Adapter ( Input: 100-240V, 50/60Hz, 0.5A Output: 5V, 2A ) Mounting Hardware Owner's Manual

At a Glance

Front View Split and extend Dual DVI signals from a computer to two sets of Dual Displays 1920 x 1200 (60Hz) resolution up to 150ft Up to 4 displays per channel when using repeaters Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Overview

See all products Tripp Lite's B140-002-DD takes in two PC DVI source video signals, and splits each to two remote monitors. Passive, non-powered Receivers allow distances up to 50ft @ 1920x1080 resolution, or 100ft @ 1024x768 resolution, over solid conductor Cat6 cable. Active, powered Receivers extend the distance to 150ft @ 1920x1080, and 200ft @ 1024x768 (receivers purchased separately). Additional monitors can be daisy-chained (up to 3) on each channel, allowing four monitors per channel, by using Tripp Lite B140-110 Repeater/Extender. Tripp Lite recommends Cat6 Solid Conductor patch cables for Digital Extenders (DVI/HDMI). Tripp Lite N202 series patch cables are designed specifically for these types of devices...pre- terminated, Solid Conductor Cat6 patch cables up to 200ft. More from the Manufacturer