HomeIndexesTripp LiteSMART2200RMXLN

 

Tripp Lite Series SmartPro UPS 2200VA 120V Sine Wave, Network Card, Extended Run

Tripp Lite SMART2200RMXLN

Click image to enlarge or see more views.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


SmartPro SmartPro Model SMART2200RMXLN

UPC Code: 037332177926

Provantage Code:  TRP92A0

Condition:  Factory New

  • Product Type: Line-interactive UPS
  • Limited Warranty: 3 Year
  • Plug/Connector Type: NEMA 5-20P
  • Product Family: SmartPro SmartPro
  • Form Factor: Rack/Tower
  • TAA Compliant: Yes

TAA CompliantEnergy StarBig DealsSatisfaction Guaranteed

ComputingPower Equipment / AccessoriesUPS - General Purpose

Tripp Lite SMART2200RMXLN Specifications

    Tripp Lite Series SmartPro UPS 2200VA 120V Sine Wave, Network Card, Extended Run


Details


    Rear View
    Features Include
    • Tripp Lite SMART2200RMXLN line interactive 2U rack/tower UPS with 2200VA / 2.2kVA / 1920W capacity and extended runtime options
    • Line interactive UPS with Automatic Voltage Regulation (AVR) corrects brownouts and overvoltages from 83 to 145V
    • NEMA 5-20P input plug; 4 NEMA 5-15/20R and 4 5-15R output receptacles, Two independently switched output load banks
    • Maintains uninterrupted operation of connected networking equipment during blackouts, surges, brownouts and overvoltages
    • High 96% efficiency rating in line-power mode offers reduced power consumption and BTU emisssions
    • Internal batteries offer 12 minutes at 50% load (960W) and 4.5 minutes at 100% load (1920W)
    • Extended runtime is available with optional BP48V24-2U (limit 1) OR BP48V60RT3U (no limit), Output is reduced to 1600 watts maximum with external battery packs
    • External battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)
    • Hot-swappable, user-replaceable internal batteries and external battery packs can be replaced with no disruption to connected equipment
    • Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens of detailed UPS and site power information
    • LCD interface also supports a number of advanced user setup and operating preferences
    • Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND enables tower placement
    • Built-in USB, RS-232 and pre-installed SNMPWEBCARD accessory
    • HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
    • Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable

    In the box

    • SMART2200RMXLN UPS system with Pre-installed SNMPWEBCARD
    • PowerAlert software with USB, Serial & EPO cabling
    • 4 post installation kit
    • Owner's manual

At a Glance

    • Protects equipment against blackouts, brownouts, transient surges and line noise
    • Keeps equipment running during outages to allow time for file saves and safe shutdown
    • Unity power factor ensures maximum power possible at each power rating
    • ENERGY STAR 2.0-certified to save electricity, lower costs and protect the environment
    • 2-line front-panel LCD with 10 selectable screens reports detailed UPS and site power info
    • Included WEBCARDLXE network interface allows 24/7 remote monitor and control..

Overview

    1.95kVA/1.95kW/ 120V Battery Backup for Distributed IT, Telecom or Enterprise Deployments

    This rack-mount line-interactive UPS system provides reliable battery backup and AC power protection against blackouts, brownouts, surges and line noise that can damage your valuable IT equipment or destroy data. The SMART2200RMXLN is ideal power management for high-end in-rack networking equipment, including servers, VoIP phones, data storage and PoE switches. Unity power factor ensures the most watts possible at each power rating, so you can connect more equipment.

    Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages

    The field-replaceable, hot-swappable VRLA battery modules allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Switchover from line to battery power happens within milliseconds to maintain continuous operation of connected equipment without interruption or rebooting. Extra runtime is available by connecting up to four optional extended battery modules (BP72VRM2U, sold separately).

    Pre-Installed LX Platform Network Management Card Allows Remote Access 24/7

    The WEBCARDLXE network interface enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. The IP-based Auto Probe feature ensures continuous network uptime by communicating with other network devices, detecting lost connectivity and automatically rebooting IT equipment. Optional EnviroSense2 modules (E2MT, E2MTDO and E2MTHDI, all sold separately) provide a variety of environmental monitoring and control options.

    NEMA 5-20R Outlets Protect Your Connected Components

    One L5-20R and six managed 5-20R outlets provide connected equipment with pure sine wave AC output and allow you to monitor power consumption down to the outlet group level. Power provided by these outlets is filtered to protect connected equipment against damaging surges and line noise. Four outlets are grouped into two programmable load banks that let you shed non-critical loads to extend runtime for critical loads. Front and rear cooling fans help protect equipment from overheating.

    Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions

    AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART2200RMXLN maintains regulated 120V nominal output during brownouts and overvoltages from 80V to 151V while keeping the battery fully charged and ready to take over in case of power failure.

    Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

    This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

    ENERGY STAR-Certified to Help You Save Money and Protect the Environment

    By meeting strict U.S. Department of Energy and U.S. Environmental Protection Agency requirements, this ENERGY STAR 2.0 UPS system provides high operational efficiency to signal a reduction in BTU emissions, save on utility and cooling costs and help protect the environment.

    More from the Manufacturer

Application/Usage

    Data Storage

    Server

    Switch

    IT Equipment

Certifications & Standards

    • UL1778
    • CSA
    • NOM
    • FCC Part 15 Category B (EMI)

Additional Product Images


Specifications

Product NameTripp Lite Series SmartPro UPS 2200VA 120V Sine Wave, Network Card, Extended Run
Product TypeLine-interactive UPS
PhaseSingle Phase
Receptacle TypeNEMA L5-20R

NEMA 5-20R

Product FamilySmartPro SmartPro
Backup / Run Time (Half Load)12 Minute
Backup / Run Time (Full Load)4 Minute
Load Capacity (VA)1950 VA
Load Capacity (Watt)1950 W
Replaceable BatteryYes
TAA CompliantYes
Receptacle Detail6 x NEMA 5-20R

1 x NEMA L5-20R

Rack Height2U
Plug / Connector TypeNEMA 5-20P
Form FactorRack/Tower
Network ManagementSNMP/Web
Waveform TypePure Sine Wave
Hot SwappableYes
Input Voltage120 V AC
Battery ChemistryLead Acid
USBYes
Minimum Operating Temperature32°F (0°C)
Maximum Operating Temperature104°F (40°C)
Serial PortYes
Battery CharacteristicsValve-regulated
DC System Voltage72 V DC
EPO PortYes
USB (HID Compliant) PortYes
Maximum Operating Elevation10000 ft
Maximum Storage Elevation32808 ft
Storage Temperature5°F (-15°C) - 122°F (50°C)
Transfer Time4 ms
Typical Battery Recharge Time4.50 Hour
Output Power Factor1
Country of OriginChina
Height3.4"
Width17.2"
Depth23.7"
Output Frequency60 Hz
AlarmRemote Shutdown

UPS StartUp

Power Failure

Overload

UPS Fault

Low Battery

Product SeriesSmartPro
Product ModelSMART2200RMXLN
Overload ProtectionYes
Product LineSmartPro
DisplayLCD
Surge Energy Rating380 J
Package Contents
  • SmartPro SMART2200RMXLN 1950VA Rack/Tower UPS
  • WEBCARDLXE Network Management Card
  • USB Cable
  • DB9 Cable
  • Rack-mounting Hardware
  • Tower support Stands
  • Safety Instructions
  • Advanced User Guide
Limited Warranty3 Year
Software IncludedPowerAlert Software
Output Voltage100 V AC

110 V AC

115 V AC

120 V AC

Emergency Power OFFYes
 
Supplies/Accessories for Tripp Lite SMART2200RMXLN





Tripp Lite Tower Conversion Kit for 2U-9U Rack Mount Devices

Mfg Part# 2-9USTAND


The Following Are Compatible With Tripp Lite SMART2200RMXLN





Tripp Lite 4-Post Rack-Mount Shelf Kit Universal for Wallmount Racks 1U

Mfg Part# 4POSTRAILKITWM


Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:

Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.

Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.


Shop with confidence! Provantage is an authorized Tripp Lite dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

Tripp Lite
 
© Copyright 1984-2024 Provantage
Tripp Lite SmartPro SmartPro Model SMART2200RMXLN