Contact us and save even more if you meet these Big Deal qualifications.Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
PDUMH30HVAT Metered ATS / Auto-Transfer Switch offers 208/240V 30A dual-input power distribution and visual current metering in a 2U horizontal rackmount installation format. Set of two NEMA L6-30P line cords enable separate primary and secondary input connections. Includes 19 built-in outputs (16 C13, 2 C19 & 1 L6-30R). Digital current metering with push-button display control tracks output power consumption in 4 segments: Bank 1 (9 upper C13 & C19 outlets), Bank 2 (9 lower C13 & C19 outlets), L6-30R (single outlet) and total PDU output. Supports 2U installation in 2 or 4 post racks, with additional support for wall-mount and under-counter placement.
Tripp Lites Metered ATS / Auto-Transfer Switch PDU systems provide redundant-power and hot-swappable UPS options for network and server applications powered by a single input line cord. Separate PRIMARY and SECONDARY input line cords enable a redundant connection to two separate mains circuits. ATS systems will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Super-fast switchover between primary and secondary power sources occurs within 2-6 milliseconds. ATS functionality is supported by any two compatible power sources, regardless of phase angle, to offer support for a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is connected to a separate UPS system. In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LEDs display primary and secondary power availability. Additional LEDs identify the displayed load segment reported by the digital current display.
Features Include
PDUMH30HVAT Metered ATS / Auto-Transfer Switch PDU offers 208/240V 30A dual-input power distribution and visual current metering in a 2U horizontal rackmount installation format (Agency de-rated to 24A continuous)
Set of two 10 ft. / 3m NEMA L6-30P input line cords enable separate PRIMARY and SECONDARY input connections
Includes 19 built-in outputs (16 C13, 2 C19 and 1 NEMA L6-30R)
Digital current metering with push-button display control and indicator LEDs tracks output power consumption in 4 segments: Bank 1 (9 upper C13 & C19 outlets), Bank 2 (9 lower C13 & C19 outlets), L6-30R (single outlet) and total output of all three load banks combined
Metered ATS PDU systems provide redundant power and hot-swappable UPS options for networking and server applications powered by a single input line cord
Separate primary and secondary input line cords enable connection to two separate mains circuits
The ATS PDU normally maintains continuous output to all outlets as derived from the primary input cable
If the primary input becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable
Super-fast switchover between primary and secondary power sources occurs within 2-6 milliseconds
ATS functionality is supported by any two 208/240V 30A power sources, regardless of phase angle, to offer reliable support for advanced redundant power networking applications
Enables fault-tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is connected to a separate UPS system
In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application
ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported
On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
Front input LEDs display primary and secondary power availability; Additional LEDs identify the displayed load segment reported by the digital current display
In the box
Auto Transfer Switch PDU
Rackmount installation brackets
Installable plug-retention shelves & cable ties
Details
Features Include
PDUMH30HVAT Metered ATS / Auto-Transfer Switch PDU offers 208/240V 30A dual-input power distribution and visual current metering in a 2U horizontal rackmount installation format (Agency de-rated to 24A continuous)
Set of two 10 ft. / 3m NEMA L6-30P input line cords enable separate PRIMARY and SECONDARY input connections
Includes 19 built-in outputs (16 C13, 2 C19 and 1 NEMA L6-30R)
Digital current metering with push-button display control and indicator LEDs tracks output power consumption in 4 segments: Bank 1 (9 upper C13 & C19 outlets), Bank 2 (9 lower C13 & C19 outlets), L6-30R (single outlet) and total output of all three load banks combined
Metered ATS PDU systems provide redundant power and hot-swappable UPS options for networking and server applications powered by a single input line cord
Separate primary and secondary input line cords enable connection to two separate mains circuits
The ATS PDU normally maintains continuous output to all outlets as derived from the primary input cable
If the primary input becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable
Super-fast switchover between primary and secondary power sources occurs within 2-6 milliseconds
ATS functionality is supported by any two 208/240V 30A power sources, regardless of phase angle, to offer reliable support for advanced redundant power networking applications
Enables fault-tolerant hot-swappable UPS protection when used with a single UPS and fully redundant dual-UPS protection when each cord is connected to a separate UPS system
In a dual-UPS configuration, the primary input cable must be supported by a full time sine wave online UPS. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application
ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported
On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source
Front input LEDs display primary and secondary power availability; Additional LEDs identify the displayed load segment reported by the digital current display
TAA-Compliant
In the box
Auto Transfer Switch PDU
Rackmount installation brackets
Installable plug-retention shelves & cable ties
At a Glance
Single phase 30A 208V Auto Transfer Switch / ATS Metered PDU with Solid State Switching
Enables redundant-power configurations for single-corded network devices
Separate primary & secondary inputs connect to any two compatible power sources
Tripp Lite Metered ATS / Auto Transfer Switch provides a redundant power option for single-corded network devices. Dual input cords support separate connection to PRIMARY and SECONDARY power sources. The ATS will normally maintain continuous output to all outlets as derived from the primary input cable. If the primary power source becomes unstable or fails altogether, the ATS will switch over to the secondary power source until the primary input is restored and stable. Highly reliable solid-state switching between primary and secondary inputs occurs in 1-5 milliseconds. ATS functionality is supported by any two compatible AC power sources, regardless of phase angle, to support a variety of advanced redundant power networking applications. Enables fault tolerant hot-swappable UPS protection when used with a single UPS and fully redundant UPS protection when each cord is connected to a separate UPS system. In a two-UPS environment, the primary input cable must be supported by a full time sine wave UPS with zero transfer time. Tripp Lite SmartOnline series is highly recommended for use as the primary UPS in a two-UPS application. ATS configurations utilizing separate mains circuits, backup generators and even separate utility power grid feeds are fully supported. On-board ATS processor constantly evaluates power quality on both input sources to prevent transfer to the secondary source when unavailable or of lower quality than the primary source. Front input LED's display primary or secondary power availability.
You may be able to save even more on your order if you meet the following Tripp Lite BIG DEAL qualifications:
Purchase a minimum of $10,000 of hardware, or $500 of cables to qualify.
Not enough in stock? No problem! We can ship your large quantity order direct from Tripp Lite's warehouse. These orders typically ship within 2-3 business days.
Shop with confidence! Provantage is an authorized Tripp Lite dealer.