Server Technology Switched Pops PRO4X IX PDU Wye 20A IEC 60309 3P+N+G 6 Hour Plug

Server Technology C4G48RA-GNBD2FD3 Specifications

Switched Pops PRO4X IX PDU Wye 20A IEC 60309 3P+N+G 6 Hour Plug

At a Glance

HDOT Cx Outlets: Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs. 45 Degree Angled Infeed: The angled infeed improves accessibility, provides infeed strain relief, and its bend radius is suitable with 60A rated cords. Network Monitoring: Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more. Multi-Unit Linking & Cascading: Daisy chain up to 16 PDUs from a primary PDU using a USB or Ethernet connection through a single IP address. Multi-Color LCD: An easy-to-read LCD provides a local indication of power usage, alerts, and alarms. Hot Swappable Controller: The Controller is the PDU's center of intelligence and houses computing, display, and connectivity ports. Power Quality Measurements: Monitor and alert on the power being fed to the PDU for harmonics, voltage dips and swells, crest factor, and more at the outlet or load. RGB LED Outlet Indicators: RGB LEDs identify an outlet's on/off state, if it's above/below a certain power threshold, or if it's in suspect of a power measurement irregularity. Waveform Capture: Capture voltage and current waveforms automatically or upon demand. RamLock Locking Outlets: A mechanical locking mechanism built to secure the broadest range of C14 and C20 plugs in place. Environmental Monitoring: Support up to 12 daisy-chained DX2-series SmartSensors, each with the ability to send SNMP-based alerts and email notifications. Per-Inlet Power Sensing: PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet. Per-Outlet Power Sensing: POPS® (Per Outlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, and Energy per outlet. Branch Circuit Protection: This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetic-hydraulic circuit breakers or UL 248 fuses. Outlet Control: On Switched PDUs, cycle power to individual outlets or groups of outlets to reboot servers, or power off unused receptacles. Alternating-Phase Outlets: Evenly distributes multiple phases of power to each outlet for simplified load balancing, reduced cord lengths, and better airflow. High Temperature Rating: This product has been tested and approved for safe and reliable operation in 60 °C data center environments. Flexible Mounting: Includes standard button mounts along with provisions for custom mounting brackets. Color-Coded Options: Select from six colors to designate PDU circuits in the data center - black, white, red, green, blue, and yellow.

Overview

Server Technology's PRO4X Switched POPS PDUs run on our state-of-the-art Xerus network interface platform and provide remote access to power, PDU status, input, outlet and branch current monitoring, and outlet on/off control. The PDU features RamLock, a self-locking mechanism to prevent accidental cord disconnects, and our award-winning HDOT Cx outlets that can be deployed as either a C13 or C19. Switched POPS PDUs are secured with strong configurable password, active directory, 256-bit AES encryption, SSH, SSL and HTTPS support. SNMP traps provide automated alerts on power and environmental conditions from Legrand's plug-and-play environmental monitoring sensors like temperature, humidity, water, dry contact closure, airflow, air pressure differential, and more.

Management

HTTP/HTTPS TLSv1.2 SSHv2 Telnet SNMPv2c v3 (GET, SET, Traps) IPv4 and IPv6 LDAPv3/LDAPS TACACS+ RADIUS FTP/SFTP

Certifications & Standards

North American: Safety (Listed & Certified, cTUVus mark) UL 62368-1 CSA C22.2 No. 62368-1 EMC FCC Part 15 Subpart B Sections 15.107 & 15.109, Class A CANICES-003, Class A Global: Safety ENIEC 62368-1 (TUVR certified, T-mark) IEC 62368-1 incl. regional, national and harmonized differences (IECEE CB scheme) EMC EMC EN55032 / CISPR 32 EN55035 / CISPR 35 EN61000-3-2 / IEC 61000-3-2 EN61000-3-3 / IEC 61000-3-3 CE Mark 2011/65/EU (RoHS Directive) 2014/35/EU (Low Voltage Directive) 2014/30/EU (EMC Directive) UKCA Mark Electrical Equipment (Safety) Electromagnetic Compatibility

Package Contents

PRO4X 48-Outlets PDU Standard Button Mounts