Server Technology Switched Master PRO2 Pops Pips, 2U, 24 Hdot Outlets (18XC13,6XCX), Input Amp Meters

Server Technology C2WG24SN-YBLN5D6 Specifications

Switched Master PRO2 Pops Pips,2U,24 Hdot Outlets(18XC13,6XCX) ,Input Amp Meters,208V 3-Phase 20A,NEMA L21-20P,10 Ft

At a Glance

HDOT Cx Outlets Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs. Network Monitoring Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more. Hot-Swap Network Card Network access is ensured when power is lost to the Primary unit with backup power provided by the Linked unit. Star Multi-Linking PRO2 provides the ability to link up to four power circuits using one IP address. Primary Expansion PDU provides backup power to network card. Temperature/Humidity Monitoring Primary and Expansion (select products) units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications. IP Access, Security & Communications Web, SSH, Telnet, SNMPv2c & v3, RS-232 serial, 10/100 Base T-Ethernet, LDAP(S), TACACS+, RADIUS, DHCP, & SMTP/email. Auto-Flip Current Display Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high-density cabinets. Per-Inlet Power Sensing PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet. Per-Outlet Power Sensing POPS® (Per Outlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, and Energy per outlet. Branch Current Monitoring Monitors current at each breaker branch and provides SNMP-based alerts and emails on high usage that risks a tripped circuit. Branch Circuit Protection This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetic-hydraulic circuit breakers or UL 248 fuses. Outlet Control On Switched PDUs, cycle power to individual outlets or groups of outlets to reboot servers, or power off unused receptacles. High Retention Locking Outlets PRO2 receptacles have high retention and are compatible with P-Lock type power cords. Color-Coded Options Select from six colors to designate PDU circuits in the data center - black, white, red, green, blue, and yellow.

Overview

The Server Technology® PRO2 Switched POPS PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Switched POPS "Primary" PDU can be connected to as many as three (with optional module) PRO2 Switched POPS "Link" PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Management

HTTP/HTTPS TLSv1.2 SSHv2 Telnet SNMPv2c Syslog v3 (GET, SET, Traps) IPv4 IPv6 LDAPv3/LDAPS TACACS+ RADIUS FTP/SFTP RS-232