HomeIndexesServer TechnologyC2W42CE-YCMFAM00

 

Server Technology Switched Master PRO2 (42) Configurable Alt Phase Hdot + (3) NEMA, 5-20R Utility

Server Technology Power Distribution Units (PDU)

Image may not be actual.

Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.
PDU's Qualify for discounts, ask a sales rep for special pricing today!

PRO2 Switched Model C2W42CE-YCMFAM00

Provantage Code:  SETE1KL

Condition:  Factory New

  • Product Type: PDU
  • Plug/Connector Type: NEMA L21-30P
  • Input Current: 30 A
  • Product Family: PRO2 Switched
  • PDU Type: Switched
  • TAA Compliant: Yes

TAA CompliantBig DealsSatisfaction Guaranteed

ComputingPower AccessoriesPower Distribution Units (PDU)

Specifications

Server Technology C2W42CE-YCMFAM00 Specifications

    Switched Master PRO2 (42) Configurable Alt Phase Hdot + (3) NEMA,5-20R Utility Outlets, 208V 3PH Wye 3BR 30A L21-30P 3M/10FT Cord,,Auto-Orient Mid Display, Bottom Base Cord Entry, Doghouse Breakers,Phase Monitoring, WXD = 2.20IN x 2.50IN,Fe


At a Glance

    • Network Monitoring: Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more.
    • Hot-Swap Network Card: Network access is ensured when power is lost to the primary unit with backup power provided by the primary link unit.
    • Star Multi-Linking: Provides the ability to link up to four power circuits using one IP address. Primary link provides backup power to network card.
    • Temperature/Humidity Monitoring: Primary and Link units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications.
    • Auto-Flip Current Display: Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in high-density cabinets.
    • Per- Inlet Power Sensing: Meets ANSI C12.1 for billing-grade accuracy of Current per phase. PIPS includes voltage, active power, apparent power, power factor, and energy.
    • Branch Current Monitoring: Monitors current at each breaker branch and provides SNMP-based alerts and emails on high usage that risks a tripped circuit.
    • Branch Circuit Protection: This PDU meets the UL and IEC 60950-1 requirement for branch circuit protection through use of UL489 rated magnetic-hydraulic circuit breakers or UL248 fuses.
    • Outlet Control: On Switched rack PDUs, cycle power to individual outlets or groups of outlets to reboot servers. Or, power off unused receptacles.
    • Alternating-Phase Outlets: Evenly distributes multiple phases of power to each outlet for simplified load balancing, reduced cord lengths, and better airflow.
    • HDOT (High Density Outlet Technology): The highest outlet density available in a network connected PDU. Meets IEC C13 and C19 specifications, plus high native retention, and UL94V-0 flame rating.
    • High Temperature Rating: This product has been tested and approved for safe and reliable operation in 60 °C data center environments.
    • Flexible Mounting: Includes standard button mounts along with provisions for custom mounting brackets.
    • Color Identification: Choose from six colors to designate circuits for rack PDUs in the data center. Color options include Blue, Red, Green, White, Yellow, and Black.

Overview

    The Server Technology® PRO2 Switched PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Switched Master" PDU can be connected to as many as three (with optional module) PRO2 Switched "Link" PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration."

    The Server Technology® PRO2 Switched POPS PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Switched POPS "Primary" PDU can be connected to as many as three (with optional module) PRO2 Switched POPS "Link" PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Application/Usage

    IT Equipment

    Server Rack/Cabinet

Management

    • HTTP/HTTPS
    • TLSv1.2
    • SSHv2
    • Telnet
    • SNMPv2c
    • v3 (GET, SET, Traps)
    • IPv4 and IPv6
    • LDAPv3/LDAPS
    • TACACS+
    • RADIUS
    • FTP/SFTP

Certifications & Standards

    • cTUVus

      Safety (Listed & Certified, cTUVus mark):

      • UL 62368-1
      • CSA C22.2 No. 62368-1

      EMC:

      • FCC Part 15 Subpart B Sections 15.107 & 15.109, Class A
      • CANICES-003, Class A

Package Contents

    • Switched PDU - 8.6kW, C2W42CE-YCMFAM00
    • Button Mounts

      • PRO2 45-Outlets PDU
      • Standard Button Mounts


Specifications

Product NameSwitched Master PRO2 (42) Configurable Alt Phase Hdot + (3) NEMA, 5-20R Utility
Product TypePDU
PhaseThree Phase
Receptacle TypeIEC 60320 C13

NEMA 5-20R

Product FamilyPRO2 Switched
PDU TypeSwitched
Power Rating (Watt)8600 W
Receptacle Detail42 x IEC 60320 C13

3 x NEMA 5-20R

Plug / Connector TypeNEMA L21-30P
Form FactorRack/Tower
Input Current30 A
Mount TypeCabinet-mountable

Rack-mountable

Cabinet-mountable

Button Mount

Protection TypeOvercurrent Protection

Overload Protection

Circuit Protection

Fuse

Input Voltage208 V

230 V AC

Network (RJ-45)Yes
Plug / Connector Detail1 x NEMA L21-30P
Country of OriginTaiwan
Height70"
Width2.2"
Depth2.5"
Product SeriesSwitched

PRO2

Product ModelC2W42CE-YCMFAM00
Product LinePRO2
Limited Warranty2 Year
Circuit BreakerYes
WARNING: Products made with PVC can expose you to chemicals including DEHP, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Supplies/Accessories for Server Technology C2W42CE-YCMFAM00



Considering a Volume Purchase?
You may be able to save even more on your order if you meet the following Server Technology BIG DEAL qualifications:

PDU's Qualify for discounts, ask a sales rep for special pricing today!


Shop with confidence! Provantage is an authorized Server Technology dealer.

Visit the Manufacturer
Learn more by visiting the manufacturer's website.

 
© Copyright 1984-2024 Provantage
Server Technology PRO2 Switched Model C2W42CE-YCMFAM00