Server Technology Switched (Expansion) Pops/Pips PRO2, Per Outlet and Per Input Power Sensing, 0U, (24

Server Technology SEV-6501K Specifications

Switched (Expansion) Pops/Pips PRO2, Per Outlet And Per Input Power Sensing, 0U, (24) IEC C13 And (6) C19, (1) LED Amp Meter In the Middle, 230V, 32A with IEC 60309 2P+Pe Blue, Pivot Entry, (2) Temp/Humidity Sensor Capable, Circuit Breakers

At a Glance

Network Monitoring: Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more. Hot - Swap Network Card: Network access is ensured when power is lost to the Primary unit with backup power provided by the Linked unit. Star Multi - Linking: PRO2 provides the ability to link up to four power circuits using one IP address. Primary Expansion PDU provides backup power to network card. Temperature/Humidity Monitoring: Primary and Expansion (select products) units each support two external 10' (3m) T/H probes. Receive SNMP-based alerts and email notifications. Auto - Flip Current Display: Easy-to-read LEDs display current per phase to help prevent overloads and simplify three-phase load balancing in highdensity cabinets. Per - Inlet Power Sensing: PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet. Per - Outlet Power Sensing: POPS® (Per Outlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, and Energy per outlet. Branch Current Monitoring: Monitors current at each breaker branch and provides SNMPbased alerts and emails on high usage that risks a tripped circuit. Branch Circuit Protection: This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetichydraulic circuit breakers or UL 248 fuses Outlet Control: On Switched PDUs, cycle power to individual outlets or groups of outlets to reboot servers, or power off unused receptacles. High Retention Locking Outlets: PRO2 receptacles have high retention and are compatible with P-Lock type power cords. High Temperature Rating: This product has been tested and approved for safe and reliable operation in 60 °C data center environments. Power Pivot: The 90-degree rotatable power cord allows for standardized deployment at any facility no matter where power must be routed. Flexible Mounting: Includes standard button mounts along with provisions for custom mounting brackets. Color-Coded Options: Select from six colors to designate PDU circuits in the data center - black, white, red, green, blue, and yellow.

Overview

The Server Technology® PRO2 Switched POPS PDU provides control of outlet power and local LED input current monitoring, allowing IT personnel to determine safe levels of loading on a per-phase basis while installing equipment into the rack/cabinet. The integral PIPS® and POPS® technology provides billing-grade accurate measurement of current, voltage, active power, apparent power, power factor, crest factor, and accumulated energy at the input and at each output. These power data points, along with temperature and humidity measurements (provided via optional probes), are accessible through the built-in Web and CLI interfaces as well as through SNMP. The PRO2 Switched POPS "Primary"PDU can be connected to as many as three (with optional module) PRO2 Switched POPS "Link"PDUs to extend the network access to the redundant or secondary power feed without the risks of a daisy chain linking configuration.

Application/Usage

IT Equipment Server Rack/Cabinet

Management

HTTP/HTTPS TLSv1.2 SSHv2 Telnet SNMPv2c v3 (GET, SET, Traps) IPv4 IPv6 LDAPv3/LDAPS TACACS+ RADIUS FTP/SFTP

Certifications & Standards

Safety: ENIEC 62368-1 (TUVR certified, T-mark) IEC 62368-1 incl. regional, national and harmonized differences (IECEE CB scheme) EMC EMC: EN55032 / CISPR 32 EN55035 / CISPR 35 EN61000-3-2 / IEC 61000-3-2 EN61000-3-3 / IEC 61000-3-3 CE Mark: 2011/65/EU (RoHS Directive) 2014/35/EU (Low Voltage Directive) 2014/30/EU (EMC Directive) UKCA Mark: Electrical Equipment (Safety) Electromagnetic Compatibility

Package Contents

PRO2 24-Outlets PDU Standard Button Mounts