Raritan Switched PRO4X IX PDU 12 C13+ 24 CX 208-240V

Raritan C4W36RA-DFBD2FE1 Specifications

Switched PRO4X IX PDU 12 C13+ 24 CX 208-240V

At a Glance

See all products HDOT CX OUTLETS Cx is the future-ready UL tested hybrid of a C13 and C19 outlet accommodating both C14 and C20 plugs. 45 DEGREE ANGLED INFEED The angled infeed improves accessibility, provides infeed strain relief, and its bend radius is suitable with 60A rated cords. NETWORK MONITORING Gain access to valuable data through connections including HTTP(S), SSH, Telnet, SNMP, (S)FTP, SMTP, Syslog, LDAP(S), RS-232 serial, and more. MULTI-UNIT LINKING & CASCADING Daisy chain up to 16 PDUs from a primary PDU using a USB or Ethernet connection through a single IP address. MULTI-COLOR LCD An easy-to-read LCD provides a local indication of power usage, alerts, and alarms. HOT SWAPPABLE CONTROLLER The Controller is the PDU's center of intelligence and houses computing, display, and connectivity ports. POWER QUALITY MEASUREMENTS Monitor and alert on the power being fed to the PDU for harmonics, voltage dips and swells, crest factor, and more at the outlet or load. RGB LED OUTLET INDICATORS RGB LEDs identify an outlet's on/off state, if it's above/below a certain power threshold, or if it's in suspect of a power measurement irregularity. WAVEFORM CAPTURE Capture voltage and current waveforms automatically or upon demand. RAMLOCK LOCKING OUTLETS A mechanical locking mechanism built to secure the broadest range of C14 and C20 plugs in place. ENVIRONMENTAL MONITORING Support up to 12 daisy chained DX2-series SmartSensors, each with the ability to send SNMP-based alerts and email notifications. PER-INLET POWER SENSING PIPS® (Per Inlet Power Sensing) Monitors Current Load (A), Voltage (V), Power (W), Apparent Power (VA), Crest Factor, Power Factor, & Energy per inlet. BRANCH CIRCUIT PROTECTION This PDU meets the UL and IEC 62368-1 requirement for branch circuit protection through UL 489 rated magnetic-hydraulic circuit breakers or UL 248 fuses. OUTLET CONTROL On Switched PDUs, cycle power to individual outlets or groups of outlets to reboot servers, or power off unused receptacles.

Overview

Server Technology's PRO4X Switched PDUs run on our state-of-the-art Xerus network interface platform and provide remote access to power, PDU status, input and branch current monitoring, and outlet on/off control. The PDU features RamLock, a self-locking mechanism to prevent accidental cord disconnects, and our award-winning HDOT Cx outlets that can be deployed as either a C13 or C19. Switched PDUs are secured with strong configurable password, active directory, 256-bit AES encryption, SSH, SSL and HTTPS support. SNMP traps provide automated alerts on power and environmental conditions from Legrand's plug-and-play environmental monitoring sensors like temperature, humidity, water, dry contact closure, airflow, air pressure differential, and more.

Management

HTTP/HTTPS TLSv1.2 SSHv2 Telnet SNMPv2c v3 (GET, SET, Traps) IPv4 IPv6 LDAPv3/LDAPS TACACS+ RADIUS FTP/SFTP

Warranty Information

Server Technology offers a standard 2-year limited parts & labor warranty. Extended support is available at the time of purchase. See the Support Options on the website, or contact your local Server Technology representative for more information.