Perle Systems Inj 2101-T PoE Injector 30W PoE 1 x RJ45 1 x Screw XT

Perle Systems 27030118 Specifications

Inj 2101-T PoE Injector 30W PoE 1 x RJ45 1 x Screw XT

At a Glance

10/100/1000 Mbps Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices Provide 4 to 60 Watts of PoE power IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3 Extended supply voltage range of 18 V DC ... 57 V DC, redundant Safe shield connection to ground potential Extended temperature range of -40°C to +75°C Electrical isolation of the internal power supply unit Integrated surge protection to ensure high system availability Wiring space covered with front panel cover

Overview

See all products INJ 2100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. In environments vulnerable to voltage surges, it acts as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-2100-T units are protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices.

Certifications & Standards

IEEE 802.3af IEEE 802.3at IEEE802.3bt CE UL 60079-0 Ed. 6 / UL 60079-15 Ed. 4 UL: Class I, Zone 2, AEx nA IIC T4, Ex nA IIC Gc X T4 UL:Class I, Division 2, Groups A, B, C, D UL:CSA 22.2 No. 60079-0 Ed. 3 / CSA 22.2 No. 60079-15:16 EN 61000-4-2 EN 61000-4-3 EN 61000-4-6 IEC 61643-21 cULus cUL