Perle Systems Inj 1100-T PoE Injector 30W PoE 2 x 10/100/1000BASE-T XT

Perle Systems 27030098 Specifications

Inj 1100-T PoE Injector 30W PoE 2 x 10/100/1000BASE-T XT

At a Glance

10/100/1000 Mbps Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices Provide 4 to 60 Watts of PoE power IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3 Extended supply voltage range of 18 V DC ... 57 V DC, redundant Safe shield connection to ground potential Optional Extended temperature range of -40°C to +75°C Electrical isolation of the internal power supply unit

Overview

See all products INJ 1100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliantpower over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-1100-T units are also protected against short circuits on the PoE side. Generating up to 60 Watts, the INJ 1100-T provides electrical power to remote PD access points,pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). With the INJ 1100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

Certifications & Standards

IEEE 802.3bt IEEE 802.3af IEEE 802.3at EMC Directive 2014/30/EU CE-compliant UL 60079-0 Ed. 6 UL 60079-15 Ed. 4 Class I Zone 2 AEx nA IIC T4 Ex nA IIC Gc X T4 CSA 22.2 No. 60079-0 Ed. 3 CSA 22.2 No. 60079-15:16 EN 60068-2-27 IEC 60068-2-27 EN 60068-2-27 IEC 60068-2-27 EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-6-4 EN 61000-4-6