Perle Systems Inj 1000-T PoE Injector 30W PoE 2 x 10/100/1000BASE-T XT

Perle Systems 27030068 Specifications

Inj 1000-T PoE Injector 30W PoE 2 x 10/100/1000BASE-T XT

At a Glance

10/100/1000 Mbps Supply PSE power to PoE, PoE+ and Hi-PoE compliant devices Provide 4 to 60 Watts of PoE power IEEE 802.3af, IEEE802.3at and IEEE802.3bt compliant Support for PoE PDs: Class 1 to 6 & Type 1, 2 and 3 Extended supply voltage range of 18 V DC ... 57 V DC, redundant Safe shield connection to ground potential Optional Extended temperature range of -40°C to +75°C

Overview

See all products INJ 1000 PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. They act as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. Generating up to 60 Watts, the INJ 1000 provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power). Learn more about PoE. With the INJ 1000, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

Certifications & Standards

cULus Listed cUL Listed UL Listed IEEE802.3bt Hi-PoE IEEE 802.3at PoE+ IEEE802.3af/at. IEEE802.3af IEEE802.3at IEEE802.3bt IEEE802.3af PoE EMC Directive 2014/30/EU EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-6-4 EN 61000-4-6 CE-compliant EN 60068-2-27 IEC 60068-2-27 UL, USA/Canada: Class I Div. 2 Groups A, B, C, D, T4