Perle Systems Inj 2103-T PoE Injector 30W PoE 1 x RJ45 1 x Push-In XT

Perle Systems 10040658 Specifications

Inj 2103-T PoE Injector 30W PoE 1 x RJ45 1 x Push-In XT

Overview

INJ 2100-T PoE Injectors are DIN Rail mounted single port, PoE mid-span injectors. In environments vulnerable to voltage surges, it acts as an intermediary devices between a non-PoE switch and a PoE device to inject fully compliant power over the Ethernet cable. With electrical isolation of the internal power supply, the INJ-2100-T units are protected against short circuits on the PoE side. The integrated surge protection increases system availability by protecting the connected end devices. Generating up to 60 Watts, the INJ-2100-T provides electrical power to remote PD access points, pan-tilt and zoom (PTZ) cameras and video-phones. It complies with the IEEE802.3bt Hi-PoE (60W of power) or IEEE 802.3at PoE+ (30W of power) standards and is also backward compatible with IEEE802.3af PoE (15.4W of power).Learn more about PoE. With the INJ-2100-T, there is no need to buy an expensive PoE switch or install electrical wiring and outlets in hard to reach locations. Just use and open port on an existing non-PoE switch to save time and money by sending power and data over the same cable.

Certifications & Standards

See all products IEEE 802.3bt IEEE 802.3at IEEE 802.3af EMC Directive 2014/30/EU CE-compliant EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 IEC 61643-21