Opengear 4 Serial Pinout, 2 Gbe, Global Lte-A Pro

Opengear ACM7004-2-L Specifications

4 Serial Pinout, 2 Gbe, Global Lte-A Pro

At a Glance

Smart OOB with Failover to Cellular Maintain network connectivity during failures with IP Passthrough Available with 4 port embedded switch Flexibility with built-in 4 USB console ports New highspeed global cellular modem - LTE-A Pro Built-in digital I/O and high voltage I/O Compact and powerful hardware with integrated 4 GB internal storage

Overview

The ACM7000-L Resilience Gateway ensures uptime at branch offices, retail stores, kiosks and other remote sites. Cellular access provides an always-on gateway to your off-site network devices, even when the primary network is down. Identify and remediate issues at the network edge before they become failures with Smart OOB™. Maximize WAN resilience with Failover to Cellular™ to 4G LTE networks and built-in multicarrier capabilities. 4-8 serial ports, out-of-band management of network and server devices 4 x USB 2.0 console ports, out-of-band management of network and server devices Smart OOB extends beyond traditional out-of-band management Failover to Cellular™ and IP Passthrough for out-of-band access and failover network connectivity over cellular. Integrated RESTful API engine on devices running firmware 4.0 or higher Manage all edge routers, firewalls, UPSes, PDUs with serial & USB & Ethernet consoles Centralize the management of all your enterprise remote sites and data centers with Lighthouse 5 Automatically detect and recover from outages and repair equipment faults Link Layer Discovery Protocol (LLDP) discover, identify and verify attached devices on your local network. Log audit trails to embedded 4GB local storage for troubleshooting and compliance Strong security, PCI DSS 3.2, FIPS140-2, SSL and SSH, stateful firewall, OpenVPN & IPsec Embedded internal temperature sensor Environmental and physical sensor alarm notification via SMS, SNMP or email

Application/Usage

See all products Remote Management Remote Monitoring

Miscellaneous

4 serial Cisco Straight pinout, ext power, 2 GbE Ethernet, Global LTE-A Pro Cellular module, dual SIM, 2 DIO and 2 output ports Models & Connectors: All serial ports are RJ45 RS-232 (50 to 230,400bps, Cisco pinout) 2 x RJ45 10/100/1000 Ethernet ports, primary and failover 4 x USB 2.0 console port 2 x TTL level Digital I/O ports (DIO) 5V DC max @ 20mA (supports external water /smoke / motion dry contact sensors) 2 x High Voltage Digital Outputs (HVDO) 5-30V DC@ 100mA (drives relays, alarms, etc.) 110-240V AC to 12V DC external power adapter 11.5 W total consumption Environmental: Humidity: 5% to 90% Ambient operating temperature: -25°C to 60°C (-13°F to 140°F) Non-operating storage temp: -40°C to 75°C (-40°F to 167°F) Emissions: EN 55022:2010, CISPR 22:2008, FCC Part 15 Subpart B:2015, ICES-003 Issue 5 (2014), AS/NZS CISPR 22:2009+A1:2010, EN 61000-3-2:2006/ A2:2009, EN 61000-3-3:2008 Immunity: EN 55024:2010, CISPR 24:2010, EN 61000-4-2:2009, EN 61000-4- 3:2006+A2:2010, EN 61000-4- 4:2004+A1:2010, EN 61000-4-5:2006, EN 61000-4-6:2009, EN 61000-4-8:2010, EN 61000-4-11:2004 Isolation: Serial Port: 4kV ESD protection on RS-232 transceivers Ethernet Port: 1500V AC isolation shielded with shield connected to chassis ground for signal integrity and ESD protection Other Agency Approvals: CE, UL 1950, TUV, C-Tick, Security features to support PCI DSS 3.2 compliance, NERC CIP standards, FIPS 140-2 validated module Certificate #2473 Memory & CPU: 800 MHz Armada 370 ARMv7 SoC (Marvell 88F6W11) 256MB DDR3 SDRAM, 32MB Embedded Flash and 4GB Internal NAND Flash MTBF: AC-DC (12V) adapter - 100,000 hours Operating System: Linux with source code access and Custom Development Kit (CDK) Security & Authentication: IPsec & OpenVPN, SSL tunnels, Secure Shell (SSH V2), TACACS+, Kerberos, RADIUS and LDAP authentication, PAP/CHAP authentication (dial up), Dial back support, Local authentication, System event syslog, Authenticated NTP Gateway Router: Stateful firewall, DHCP server, DDNS, Port forwarding, IP filtering with access control lists Remote Management: HTTPS & SSH console, Nagios NSCA & NRPE, SNMP, TFTP & FTP server, Password access control, IP service port control, AJAX web terminal, Auto Response, RESTful APIs Cellular Specifications for: ACM7000-L SIM Slot: Dual Push Click 2FF SIM slots Modem Device: These models utilize the Sierra Wireless EM7565. This a global cellular module ceritfied CE, FCC, GCF, IC, JRF/JPA, NCC, PTCRB Connectors: 2 x SMA connectors for cellular with diversity and 1 x SMA connector for GPS Air Interface: LTE-A Pro (LTE-LAA), HSPA+ Frequency Bands:4G LTE B1, B2, B3, B4, B5, B7, B8, B9, B12, B13, B18, B19, B20, B26, B28, B29, B30, B32, B41, B42, B43, B46, B48, B66 3G HSPA+ B1, B2, B4, B5, B6, B8, B9, B19 Data Services: Transfer rate (peak): Download 600 Mbps/Upload 150 Mbps CAT-12

Package Contents

ACM7000-L Resilience Gateway Rack Mount Kit - Ear and Screw (Part# 590003) 1 x Digital I/O Black Terminal Block (Part# 319115) DB9F-RJ45 Straight Adapter (Part# 319015) 4 x Rubber Feet (Part# 370003) 12VDC Universal Power Supply (Part# 450031) 2 x 4G Cellular Blade Antennas 1 x ACM7000-L Antenna Extension Kit (Part# 590051) (-L variants only) Quick Start Guide