Omnitron Systems Technology FlexPoint 10/100 RJ-45 to 100 Fiber MM/ST 1310nm/5km DC Terminal
Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.Deal Registration Program applies to any sales opportunities of Omnitron systems labeled products with a combined total value of at least $5,000
FlexPoint 10/100 RJ-45 to 100 Fiber MM/ST 1310nm/5km DC Terminal
Highlights
The FlexPoint 10/100 rate converter is a member of the modular FlexPoint product line. The FlexPoint product line supports the IEEE 802.3 standard and provides an extensive range of connectivity options across different media types.
This rate converter features one 10/100 auto-sensing UTP port that adjusts its speed to the speed of the attached device. In addition, the FlexPoint 10/100 automatically negotiates and provides full-duplex or half-duplex capability to maximize network bandwidth. These features allow a seamless migration path to newer technologies. An override switch provides total manual control over the 10/100 operation of the UTP port and the half/full duplex operation of both the fiber and UTP port.
The FlexPoint 10/100 is a modular 10BASE-T or 100BASE-TX copper to 100BASE-FX fiber media converter that provides reliable and cost-effective network connectivity and fiber extension.
The FlexPoint 10/100 features a 10/100 auto-sensing RJ-45 port that adjusts to the highest level of performance supported by the attached device. An override switch provides manual control over the 10/100 operation of the RJ-45 port and the Half/Full-Duplex operation of both the fiber and RJ-45 ports.
When configured for auto-negotiation, the RJ-45 port automatically detects and sets MDI/MDI-X crossover. When configured for manual operation, the FlexPoint 10/100 features a manual switch to provide the MDI/MDI-X crossover.
The fiber port supports fixed-fiber connectors (SC, ST or LC) and Small Form Pluggable (SFP) transceivers, enabling easy adaptability to different fiber types, distances and wavelengths. The FlexPoint 10/100 supports multimode, single-mode, single-mode single-fiber, in standard and CWDM wavelengths.
Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or specific network requirements. The LEDs report the availability of power, port activity and link status, speed and duplex modes.
Certifications & Standards
EIA/TIA 568A/B
Compliance:
UL
CE
FCC Class A
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX and 100BASE-FX
Miscellaneous
Input Voltage:
5-32VDC via 2-PIN Terminal Connector (0.5A @ 9VDC)
Shop with confidence! Provantage is an authorized Omnitron Systems Technology dealer.