Fuser Type 00 110-120V Return Program for MS81X MX71X MX81X
Overview
The operator panel displays the message 80 "Replace maintenance kit" at required maintenance intervals. You must replace the fuser at this interval to maintain the print quality and reliability of the printer.
Check the 2 digit type code on the fuser, or check Device Information using the embedded web server or the menus page for a replacement part number.
There are multiple warnings to indicate that the fuser is nearing end of life and that a maintenance kit is required, including error codes 80.0x, 80.1x, and 80.2x. If you receive error code 80.3x, the fuser has reached its rated life and the printer stops until a maintenance kit is installed. You must install the correct Fuser Maintenance Kit for the type of fuser that is installed in the printer.
Lexmark Return Program fusers are patented devices that are sold at a special price subject to the restriction that the fuser may be used only once. Following the initial use, the customer agrees to return the fuser only to Lexmark for remanufacture and/or recycling. The Return Program fusers are designed to stop working once they reach their respective rated life (as established by Lexmark). If the customer does not accept these terms, replacement fusers sold without these terms are available through www.lexmark.com.
Shop with confidence! Provantage is an authorized Lexmark dealer.