Cisco Systems Cisco DNA Traffic Telemetry Appliance
Volume Discounts
Contact us and save even more if you meet these Big Deal qualifications.Purchase a minimum of $10,000 of Cisco products to qualify. Reach out to a sales rep!
Note: We Are Unable to Sell this Product to Dealers. Provantage is authorized to only sell this product to a final purchaser or licensee that has acquired it for their own use and not for resale, remarketing or distribution.
The Cisco DNA Traffic Telemetry Appliance is a telemetry sensor platform that is used to generate telemetry from mirrored IP network traffic and share it with Cisco DNA Center for application and endpoint analytics. Network traffic is received from switches and routers via Switched Port Analyzer (SPAN) mirroring and fed into the Cisco DNA Traffic Telemetry Appliance mirroring interfaces. The appliance analyzes the received traffic to produce a telemetry stream for Cisco DNA Center that is sent via the appliance's network interface.
The platform supports 20-Gbps sustained forwarding data traffic through the chassis and comes in a 1-RackUnit (1RU) form factor. The appliance has six built-in 1-Gbps Small Form Factor (SFP)-only interfaces (these do not support SFP+), and two built-in 10-Gbps Enhanced SFP (SFP+) interfaces (these support only the 10-Gbps rate) that support Synchronous Ethernet (SyncE). The device comes with one copper Ethernet 10/100/1000 Mbps network management port and supports storage extension through the network interface module (NIM) slot.
Features and benefits
The Cisco DNA Traffic Telemetry Appliance complements endpoint and application analytics solutions on Cisco DNA Center. The fixed, 1RU form factor and Cisco IOS® XE software-based device management make it an easy fit into existing network deployments. Cisco DNA Center manages the appliance in a manner similar to the way it manages network devices such as switches and wireless devices.
Miscellaneous
Default Memory: 16-GB DRAM
Processor: Integrated in the chassis: Intel 1.8GHz Quad Core Processor
Network and management I/O:
Supported connectors:
One RJ-45 10/100/1000 management Ethernet port
One RJ-45/RS-232 compatible console port
One Mini-USB serial console port
One RJ-45/RS-232 compatible auxiliary port
Two USB 2.0 connectors
Gigabit Ethernet ports:
Yes: Six 1G SFP ports
10 Gigabit Ethernet port:
Yes: Two 10G SFP+ ports
Note: Built-in 10G ports cannot be reduced to 1G speed.
Network interface module: Yes, Only for SSD cards
Wall-mounting: No
External USB flash memory: 1-GB USB flash-memory support
Redundant power supply: Yes: Dual power supplies by default; option of either AC or DC power supply
Power input:
Worldwide ranging AC input range (85 to 264 VAC)
Worldwide ranging DC (-40 to -72V; 48V nominal)
Power consumption:
Maximum (DC): 242W
Maximum (AC): 250W
Maximum (out): 250W
Airflow: Front to back
Operating temperature (nominal): 32 to 104°F (0 to 40°C)
Operating temperature (short-term): 32 to 122°F (0 to 50°C)
Operating humidity (nominal) (relative humidity): 10% to 85%
Operating humidity (short-term): 5% to 90%
Storage temperature: -40° to 150°F (-40° to 70°C)
Storage humidity: (relative humidity) 5% to 95%
Operating altitude: -500 to 10,000 feet (-152 to 3048 meters)
Network Equipment Building Standards (NEBS): GR-1089 and GR-63
EMC standards:
FCC 47 CFR Part 15 Class A
VCCI Class A
AS/NSZ Class A
CES-003 Class A
EN55022/CISPR 22 Information Technology Equipment (Emissions)
EN55024/CISPR 24 Information Technology Equipment (Immunity)
Shop with confidence! Provantage is an authorized Cisco Systems dealer.