Chief Manufacturing Chief RPA Inverted Projector Ceiling Mount - Black

Chief Manufacturing RPA000 Specifications

Chief RPA Inverted Projector Ceiling Mount - Black

Overview

This ceiling mount is the top assembly only. For the interface bracket that attaches to your projector see SLBU (universal) or use Chief's MountFinder to determine which model number matches your specific projector.

Compatibility

See all products Sony Projectors: VPL W400Q VPL-V500Q/QM

Miscellaneous

Column: 1.5" NPT Three ceiling mounting methods Flush mount without disassembly Convenient lamp and filter access Allows natural convection ventilation Roll Adjustment: +/-4 degrees adjustment up or down Compatible with the PG-1 Projector Guard Security Cage Allows lateral shift by adding the LSB-100 Lateral Shift Accessory Pitch Adjustment: +/- 25 degrees adjustment on each side of the mount Allows cables to be routed through the top of the mount without additional accessories Compatible with a large assortment of accessories to easily overcome a variety of installation challenges Yaw Adjustment: 360 degrees by turning the mount on the threaded column and securing in place with set screw. 12 degrees yaw possible on flush mount using slots in top of RPA

Package Contents

RPA Custom Inverted LCD/DLP Projector Ceiling Mount Includes: 1 x Bracket, Ceiling 1 x Bracket, Joint 12 x Screw, Self-Tapping, Pan Head, (10-24 x 1/2"), with washer 1 x Screw, Set, 5/16" Allen Wrench Security Allen Wrench 1 x SLB-500 Bracket 2 x (M6 x 30mm) Bolts 3 x M6 Flat washers 1 x (M6 x 65mm) Bolt 6 x Thumb Nuts