C2G Audio Amplifier 50W 70V

C2G 40881 Specifications

Audio Amplifier 50W 70V

At a Glance

Left View Classroom Audio Amplifier 50 Watts of Power Plenum Rated Conference Room Amplifier Reduces noise in commercial environments Industry standard 25/70 volt design for distributed audio systems Standby mode saves power Designed for installation in Plenum air spaces TAA Compliant C2G 1 Year Warranty

Overview

Front View The 25/70V 50W Audio Amplifier is the ideal solution for supporting a distributed audio system in a classroom, conference room or other environment that requires installation in a plenum space. This amplifier supplies 50 Watts of power, 25 Watts per channel, and is built to an industry standard 25/70 Volt design. This amplifier supports many advanced features which make it a perfect fit for most applications Noise Reduction: Audio systems installed in commercial environments are susceptible to noise caused by an electrical ground loop. This will often manifest as a hum or buzz through the system. This amplifier features noise reduction technology on both the 3.5mm and RCA Stereo Audio inputs. This noise reduction eliminates the interference and allows the audio signal to pass through. Standby Mode: After five minutes without a signal, the amplifier will enter standby mode providing energy savings. The amplifier will wake from standby mode automatically when a signal is received. Accessory Power Output: The accessory power output provides 12 Volts DC and 500 mAmps.

Miscellaneous

See all products THD + Noise: < ±0.05% @ 1 KHz at nominal level (1 watt) Signal Noise: >80dB Input Sensitivity: -10dBV (316mV) Operating Temperature: 0 TO +50° C / 10% TO 90% RH, Non-condensing Storage Temperature: -25° TO +70° C / 10% TO 90% RH, Non-condensing