Allows Centronics and RS-232 devices to communicate with each other via serial to parallel or parallel to serial conversion. Simple DIP Switch settings establish the flow direction, serial transfer parameters, etc.
The IC-485S is hardware solutions to the problem of converting signals between two standards. Data transfer can take place at up to 1200m (4000), over four or two wire cable for full or half duplex, respectively. The converters can handle any RS-485/RS-422 device allowing it to function as a short haul modem or interface converter. Request to send (RTS) selection allows up to 32 receivers to be set up in a multidrop installation, making for a cost effective network configuration. The IC-485S is a bi-directional interface converters for RS-232 and RS-485. With the IC-485 series, it provides Point-to-Point, Multidrop and Simplex operations. The IC-485S also provides an extra Monitoring function.
Details
What's in the box
1x Bi-directional Converter
1x Power Adapter
1x User Manual
At a Glance
Data transmission controlled by the RTS signal.
DCE/DTE selectable.
Point to point, multidrop, and simplex/duplex link selection.
Four wire full duplex; two wire half duplex.
Compact size.
Cable distance of up to 1200m (4000 ft.).
Monitor configuration support.
Supports baud rates up to 115.2kbps.
OS Support: Windows 2000, Windows XP
Overview
IC485S is a 2-way converter for converting RS-232 signals to and from RS-422/RS-485 signals in long-distance application up to 1200m (4000 ft.). It supports the connection of up to 32 hubs.
Shop with confidence! Provantage is an authorized ATEN dealer.