30W 10/100/1000M PoE Injector with Plastic Shell (10/100/1000BASE-T, 30W)
Overview
This is a single port Power-over-Ethernet (POE) 10/100-1000Base-T Injector. This device helps eliminate the need for a POE enabled equipment switch, and add POE items such as wireless LAN, Bluetooth Access Points, and many IP function devices. The injector is typically installed near the Ethernet hub and connected to a remote POE device through a single Ethernet Cat 5e, Cat6, or Cat6a cable. The injector can support an advanced 802.3at or nonstandard (optional) compliant device which support the standard POE pin out. This AC/DC powered POE Injector is a power sourcing equipment (PSE), which combines data transferred over a fiber optic link with 48V power supply, providing power to IEEE802.3at powered device (PD) over CAT5e, Cat6, and Cat6a UTP cable (cable length up to 100 meters / 330 feet). It complies with the IEEE802.3at standard. Our media converters and network interface cards are 100% compliant for all of our networking needs. Now you have a cost effective solution to your network upgrade needs. With our certification test program, we can guarantee your product will work right the first time.
Compatibility
Wireless LAN, Bluetooth Access Points, and many IP function devices
30W 10/100/1000M PoE Injector with Plastic Shell (10/100/1000BASE-T, 30W)
Manufacturer Part Number
ADD-POEINJCT1GB30W
Product Type
PoE Injector
Maximum Output Power
30 W
TAA Compliant
No
Environmental Compliance
Restriction of Hazardous Substances (RoHS)
Waste Electrical and Electronic Equipment Directive (WEEE)
Output Ports
1 x PoE+
Input Voltage
120 V AC
Environmentally Friendly
Yes
Country of Origin
China
Certifications & Standards
IEEE 802.3at
Input Ports
1 x 10/100/1000Base-T
Packaged Quantity
1
Limited Warranty
3 Year
WARNING: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.