Remove All Items		Remove from Chart
Select another product for a side-by-side comparision.
Manufacturer		Altronix
Part Number		FIRESWITCH108
Product Name		Managed NAC Power Extender 120 VAC 60HZ, 4.8 Amp Input
Category		Power Supplies
Availability		Special Order
Price		$600.00 ADD TO CART
Provantage Code		LATX0VR
External Links		Manufacturer's Web Site
Show All Features     Hide All Features
	Abstract	The Altronix FireSwitch108 is a cost effective managed NAC Power Extender. It interfaces with 12 or 24VDC Fire Alarm Control Panels (FACP) to provide Notification Appliance Circuit expansion support, for additional horns/strobes to allow ADA compliancy. It also provides auxiliary power to support system accessories. It delivers electronically ...More
	Abstract
	Product Type	Alarm Control Panel Expansion Module
	Product Type
	Environmental Compliance	Restriction of Hazardous Substances (RoHS)
	Environmental Compliance
	Device Supported	Control Panel
	Device Supported
	Environmentally Friendly	Yes
	Environmentally Friendly
	Country of Origin	United States
	Country of Origin
	Height	15.5"
	Height
	Width	12.3"
	Width
	Depth	4.5"
	Depth
	Certifications & Standards	UL CAN/ULC-S527-99 Control units for Fire Alarm Systems CSFM NFPA 72 Compliant
	Certifications & Standards
	Product Model	FIRESWITCH108
	Product Model
	Input Voltage	24 V DC
	Input Voltage
	Packaged Quantity	1
	Packaged Quantity
	Limited Warranty	Lifetime
	Limited Warranty
	Additional Information	Input: Power input: 120VAC 60Hz, 4.8 amp. Two (2) Class A or two (2) Class B FACP inputs. Two (2) configurable inputs trigger via Class A or Class B FACP signal circuits(polarity reversal) or dry contacts. Output: 24VDC voltage regulated power-limited NAC outputs. Output power: 10 amp max. total alarm current. 7 amp max.stand-by without battery back-up. 1 amp with battery back-up including dedicated Aux. output. For Canadian applications Stand-by with battery backup is limited to 0.45 amp. 2.5 amp max current per output. One (1) auxiliary output rated at 1 amp (regulated, battery backed up). 0.45 amp for Canadian applications. Any NAC can be configured as an Aux. output with or without battery back-up (special application only). When set as Aux. output, the output is not supervised. Programmable supervised indicating circuit outputs: Eight (8) Class B or Four (4) Class A, or any combination of Class A and Class B circuits. Thermal and short circuit protection with auto reset. Battery Backup: Built-in charger for sealed lead acid or gel type batteries. Automatic switchover to stand-by battery when AC fails. Zero voltage drop when switching over to battery backup. Supervision: AC fail supervision (form "C" contacts). Battery fail & presence supervision (form "C" contacts). Low power shutdown. Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units. Prevents deep battery discharge. Special Features: Programmable LCD display interface. EOL resistor value is programmable by output. Ethernet port interface for remote programmability and monitoring. 2-wire horn/strobe Sync mode allows audible notification appliances (horns) to be silenced while visual notification appliances (strobes) continue to operate. Sync protocols include Potter, Gentex®, System Sensor® , and CooperWheelock®. Temporal Code 3, Steady Mode, Input to Output Follower Mode (maintains synchronization of notification appliances circuit). Compatible with 12VDC or 24VDC fire panels. Output loop supervision directed to input 1 or input 2. Common trouble Dry N.C. output for reporting trouble to remote FACP. Ground fault detection - Ground fault maximum test impedance 1,000 ohm. Ground fault Dry N.O. output to report ground fault to remote FACP. CO Temporal Code 4 (NFPA720) include Gentex® , Potter and System Sensor® devices. Electrical: Operating temperature: 0° C to 49° C ambient. BTU/Hr.: 122.84BTU/Hr. System AC input VA requirement: 576VA. Visual Indicators: LCD display - Indicates troubles and conditions of operation. Trouble Condition Memory facilitates quick identification of an intermittent/fault (short circuit, open or ground) which has previously occurred on one or more signaling circuit outputs. LCD displays which output the fault has occurred on.
	Additional Information
	Minimum Operating Temperature	32°F (0°C)
	Minimum Operating Temperature
	Maximum Operating Temperature	120.2°F (49°C)
	Maximum Operating Temperature

--- Not all attributes may be listed for all products. A missing attribute does not necessarily mean that the product lacks that feature or that it is not supported. Please consult the manufacturer's web site if you need to be sure.